Elecbrakes VM1 Electric Brake Controller for Vehicle - Hard Wired Version

Elecbrakes VM1 Electric Brake Controller – Hard Wired Version

Hard wired version for permanent connection to your vehicle’s electrical system. Suitable for towing multiple trailers with one vehicle.

Elecbrakes Australian Designed and Manufactured

Overview

The Elecbrakes VM1 is a caravan brake controller designed for vehicle mounting, offering precise trailer brake control. It works with caravans, trailers, horse floats, and boat trailers, supporting up to three braked axles for consistent brake response. The compact unit installs without dashboard modifications and is built to withstand Australian conditions.

We have been personally using Elecbrakes for 5 years and can not recommend any other controller and now with sway control it is such good value. 

Features

• Hard Wired Installation: Connects directly to 12V DC auxiliary power and brake light circuit for stable operation.
• Supports Multiple Trailers: Controls up to 3 braked axles with a 24 Amp output, ideal for caravan brake controller and trailer brake controller needs.
• Built-in Sway Control: Reduces trailer sway without extra hardware.
• Custom Profiles: Save and switch braking settings for different trailers including caravans, horse floats, and boats.
• IP67 Rated: Waterproof, dustproof, and shockproof for tough environments.
• Included 1.5 Metre Wired Leader: Pre-installed cable simplifies connection to vehicle wiring.
• Bluetooth Brake Controller Technology: Tap + Tow NFC for fast app pairing and monitoring.
• Over-The-Air Firmware Updates: Update controller via Elecbrakes app for ongoing performance improvements.
• Smart Brake Sensor: Real-time brake power feedback allows for adaptive braking.
• No Dashboard Modifications Needed: Install in boot, tray, or under vehicle using supplied screws.
• CarPlay & Android Auto Compatible: View brake diagnostics on compatible vehicle displays through the Elecbrakes app.
• Optional remote control available.

Specifications

• Power: Requires 25 Amp 12V DC or 12 Amp 24V DC auxiliary power.
• Activation: Triggered by brake light circuit.
• Maximum Output: 24 Amps total, supporting up to three braked axles.
• Dimensions: Compact with integrated Deutsch plug for tight mounting locations.
• Operating Conditions: Suitable for Australian outdoor use.

Installation

• Recommended locations: Rear boot, quarter panel, ute tray, or underside of vehicle.
• Installation hardware: 4 self-tapping screws included.
• Tools suggested: Electric drill, 4.5mm drill bit, PH2 driver bit, marker, lubricant, personal protective equipment.
• Ensure auxiliary power circuit can supply sufficient amperage (minimum 10Vrms output).
• No dashboard or cabin modifications needed.

Included in the Box

• Elecbrakes VM1 Electric Brake Controller unit.
• 1.5 metre wired leader cable.

Additional Information

Download the Elecbrakes app from the App Store or Google Play to pair your controller, monitor brake performance, and update firmware. The app supports multiple devices, making it suitable for fleet management.

Elecbrakes is an Australian designed and made product, intended for reliable and safe towing in Australia and New Zealand.

Refer to product images for 7 Pin and 12 Pin wiring diagrams.