Your Cart is Empty
Over 4500 items in stock - Ready to Ship to You
Over 4500 items in stock - Ready to Ship to You
4222049-4222053
This is a 2 piece kit (current model) to replace single piece panels on the Heron 2.2 and 3 - knobs not included.
This is the replacement for the older one piece panel.
The metal control box attached with screws from the rear of the panel (the original single panel has screws under the decal at the front of the panel).
The Heron 3 and 2.2 share the same air handling unit inside the van. But there have been many versions over the years - these are the only panels available. They are not a perfect dimensional match but are pretty close and will work. There are no other options if you need to replace the fascia this is it.
Dimensions
We can not guarantee the covers will come with the little plugs to cover up the screw holes
May not come with screw cover caps
Collections: Air Con Parts, Airconditioning and Parts, D Collection
Type: Air Con Parts
Category: Knobs and Fascia's, Std Shipping
I drilled a hole in the centre of the small panel to be able get the cable joiner through assuming the large panel would fit but it wouldn’t I would like a refund for the large panel at the least thanks Graham
I thought that this item was discontinued but was pleasantly surprised when Everything Caravans advised of stock. The items was delivered promptly as advertised and was packaged well to prevent damage. With some modifications to the button mounts in the power unit and the slot for the power unit in the van, I was able to install the cover. Although advised that screws covers may not be available I only received 4 out of 6. I was able to modify a couple that I had to fit the holes. I would recommend Everything Caravans as a good supplier to deal with.
Fitted perfect, customer service and speed of receiving item was excellent.
The installation of the new panels was very difficult, in part due to the very poor original installation. Aside from this the small Silver control panel holes would not line up with the original control positions. Correcting this involved enlarging the control holes and removing the control box and modifying the position of the top control. Not perfect but acceptable.
After very careful measurements and marking, the motorhome furniture panel was cut to permit fitting of the control box and small control panel which was then screwed in place. The Aircon evaporator was removed for later repositioning and the cutout for the large Silver panel had to be enlarged to allow fitting of the panel.
Further work is still required to correctly relocate the evaporator in position.
Four Silver screw covers were supplied with the panels, however 6 are necessary to cover all panel screws,
Despite all of this I am just glad to be able to replace the original cracked panel.
Great service and delivery
I drilled a hole in the centre of the small panel to be able get the cable joiner through assuming the large panel would fit but it wouldn’t I would like a refund for the large panel at the least thanks Graham
I thought that this item was discontinued but was pleasantly surprised when Everything Caravans advised of stock. The items was delivered promptly as advertised and was packaged well to prevent damage. With some modifications to the button mounts in the power unit and the slot for the power unit in the van, I was able to install the cover. Although advised that screws covers may not be available I only received 4 out of 6. I was able to modify a couple that I had to fit the holes. I would recommend Everything Caravans as a good supplier to deal with.
Fitted perfect, customer service and speed of receiving item was excellent.
The installation of the new panels was very difficult, in part due to the very poor original installation. Aside from this the small Silver control panel holes would not line up with the original control positions. Correcting this involved enlarging the control holes and removing the control box and modifying the position of the top control. Not perfect but acceptable.
After very careful measurements and marking, the motorhome furniture panel was cut to permit fitting of the control box and small control panel which was then screwed in place. The Aircon evaporator was removed for later repositioning and the cutout for the large Silver panel had to be enlarged to allow fitting of the panel.
Further work is still required to correctly relocate the evaporator in position.
Four Silver screw covers were supplied with the panels, however 6 are necessary to cover all panel screws,
Despite all of this I am just glad to be able to replace the original cracked panel.
Great service and delivery
